Heavy-Duty Cables for Hoists & Cranes

Heavy-load cable solutions for heavy industry – from overhead cranes in factories and warehouses to gantry cranes at seaports, steel plants and mines. HELU festoon cables, reeling cables, rubber cables, spreader cables and torsion-resistant cables withstand tension, torsion, abrasion, UV radiation and harsh weather, so your equipment never stops because of a cable.

Cranes: The Heart of Every Heavy Industry

In heavy industry - from steel production , mining , and cement manufacturing to seaports and shipbuilding—cranes and lifting equipment are an indispensable part of the process: tower cranes at construction sites, gantry cranes in factories and warehouses, jib cranes at shipyards and ports, slewing cranes on production lines, and hydraulic lifting systems.

Each environment places its own demands on electrical connections, especially mechanical loads such as tension, compression, abrasion, bending and torsion. Outdoor equipment must also resist moisture, UV radiation, extreme temperatures and hydraulic oil leaks. HELU supplies the complete range of festoon flat cables, reeling cables, rubber cables, spreader cables, torsion-resistant cables, VFD cables, bus cables, cable glands and accessories for the entire lifting system.

The Challenges of Lifting Systems

Our product portfolio

1. Flat cable for festoon applications

1. Flat cable for festoon applications

Discover our products
2. Reeling cables

2. Reeling cables

Discover our products
3. Spreader cables

3. Spreader cables

Discover our products
4. Lift and elevator cables

4. Lift and elevator cables

Discover our products
5. Heavy-duty rubber cables

5. Heavy-duty rubber cables

Discover our products
7. Torsion-resistant cables

7. Torsion-resistant cables

Discover our products
8. Ethernet and bus cables

8. Ethernet and bus cables

Discover our products
9. Cable glands and cable accessories

9. Cable glands and cable accessories

Discover our products

Solutions for other heavy industries

Built on the same platform of cables for high mechanical loads, HELU offers dedicated solutions for every heavy industry.

Mining

Mining

Intrinsically safe cables, mining reeling cables, ATEX accessories

Discover the solution
Steel Industry

Steel Industry

Cables rated for temperatures up to 400 °C, protective tubing, heat-resistant cable lugs

Discover the solution
Port Infrastructure

Port Infrastructure

Discover the solution

Frequently Asked Questions

The cable must withstand continuous tensile, torsional, and bending stresses during winding and unwinding, as well as weather exposure and abrasion. For example, HELU’s NSHTÖU reeling cable withstands a tensile load of 15 N/mm² during installation and operation, with a minimum bending radius of just 5–6 times the cable’s diameter.

TROMMPUR®-H achieves travel speeds of up to 250 m/min and allows for the use of smaller motors and drums compared to NSHTÖU, resulting in equipment cost savings. The cable is all-weather-resistant and certified to both DIN VDE (600/1000 V) and UL (1000 V) standards.

    The cable must withstand very high mechanical stress, impact, and harsh environments. HELU’s NSSHÖU is designed for underground mines, open-pit mines, quarries, and construction sites, with a voltage rating of 0.6/1 kV and a maximum allowable conductor temperature of +90°C.

      Yes. The TROMMPUR®-H can be permanently installed in temperatures ranging from -50°C to +80°C. The NSHTÖU and NSSHÖU can be permanently installed in temperatures ranging from -40°C to +80°C.

        Flat cables are suitable for cable suspension systems on cranes, floor conveyors, and warehouse racking equipment, where compact storage and bending in a single direction are required. HELU’s PVC Flat cables are radiation-resistant up to 80 Mrad, while the NEO Flat series offers versions that are UL-certified upon request.

          The (N)SHTÖU-V is designed for vertical cable drum systems subjected to very high mechanical stress, rated for 0.6/1 kV, and capable of withstanding short-circuit temperatures up to +250°C.

            Yes. HELU’s heavy-duty industrial cables have cross-sections up to 3,240 mm² and operate at voltages ranging from 1 kV to medium voltage levels of 3.6/6–12/20 kV, with special rubber or wear-resistant PUR jackets.

            Order Now on HELU E-Store – Fast & Easy!

            PRODUCT REVIEW | PVC-Flat Cable